JAY Zip Cushion

£180.00 with VAT Relief
£216.00 inc. VAT

From £180.00 With Vat Relief *

Paediatric skin protection and positioning cushion.

The original JAY Zip is a lightweight paediatric wheelchair cushion with a dual-layer contoured foam base, microclimatic outer cover and moisture-resistant inner cover. Available in widths from 200–400mm and depths from 200–460mm, subject to clinical assessment and configuration.

Enquire Now

*This price is based on standard configuration only. This item may have multiple additional extras that are not included in the published price. Please enquire now or speak to a Modern Mobility expert for a detailed quote.

If you’re disabled or have a long-term illness, you will not be charged VAT on products designed or adapted for your own personal or domestic use.

To find out more information contact one of our mobility experts or visit the government website for further advice.

All you need to do is add everything to your basket and when you are ready to checkout just simply click the shopping cart icon in the top right of the screen. Once you have entered your details you will be asked ‘Are you eligible for VAT Exemption?’ and if you qualify click the ‘Disability VAT Exemption’ option and continue to fill in the form once you have completed the form your cart will change to show VAT at £0.

A paediatric wheelchair cushion designed for skin protection and mild positioning. The original JAY ZIP combines a child-specific dual-layer foam base with microclimatic and moisture-resistant covers.

Child-Specific Wheelchair Cushion

The original JAY ZIP Cushion was developed using anthropometric data to provide sizes appropriate for paediatric seating. Its contoured foam base is designed to support skin protection and mild positioning without unnecessarily restricting movement.

Available in widths from 200–400mm and depths from 200–460mm, the cushion can be configured around the child and wheelchair following a professional clinical assessment.

200–400mm
Available widths
200–460mm
Available depths
75kg
Maximum user weight
50mm
Front cushion height

Dual-Layer Contoured Foam

The contoured base uses two foam layers to combine structural support with comfort. Foam firmness increases with cushion width, recognising that a child using a smaller cushion may require a different level of firmness from someone using a wider configuration.

The cushion is designed to help reduce pressure and shear. However, Sunrise Medical states that no cushion can completely eliminate sitting pressure or prevent pressure injuries.

Microclimatic Outer Cover

The soft, stretchable outer cover incorporates 3DX™ spacer fabric to promote air movement. Its Ionic+™ fabric contains silver and is designed to inhibit bacterial growth.

Black is the standard cover colour. Additional spare outer covers may also be available in pink or blue, subject to the selected configuration and current availability.

Moisture-Resistant Inner Cover

A moisture-resistant inner cover provides an additional protective layer around the foam base. It includes an Aquaguard™ moisture-resistant zip and anti-wicking seam thread.

The inner cover can be wiped clean, while the removable outer cover can be machine washed at 60°C in accordance with the manufacturer’s instructions.

Professional assessment required: Sunrise Medical recommends that suitability and sizing are determined by a clinician experienced in wheelchair seating and positioning. The cushion should be fitted by an authorised supplier.

Original JAY ZIP model

This product is the original JAY ZIP Cushion with a 75kg maximum user weight. It is not the JAY ZIP Wheelchair Back or the newer JAY Zip+ Cushion, which have different specifications and options.

Explore more wheelchair cushions and backs, browse skin protection and positioning products or view other seating products from JAY.

Enquire Now

Original JAY ZIP Cushion Features

The original JAY ZIP combines a child-specific foam base with separate outer and inner covers for positioning, microclimatic support and everyday care.

Original JAY ZIP wheelchair cushion dual-layer foam base Width-Specific Foam Firmness The dual-layer contoured foam base combines structural support with comfort. Its firmness increases across the available cushion widths to account for different paediatric seating requirements.
Original JAY ZIP wheelchair cushions with black, blue and pink covers Ionic+™ Outer Cover The soft, stretchable outer cover uses silver-containing Ionic+™ fabric designed to inhibit bacterial growth. Black is standard, with pink and blue spare-cover options subject to availability.
Original JAY ZIP wheelchair cushion layered construction Layered Cover Protection The microclimatic outer cover promotes air movement, while a separate moisture-resistant inner cover helps protect the foam base.

3DX™ Spacer Fabric

Spacer fabric within the outer cover promotes air movement and helps reduce the insulating effect that some wheelchair cushion covers can create.

Moisture-Resistant Details

The inner cover includes an Aquaguard™ zip that resists moisture and anti-wicking seam thread that provides additional protection around the foam base.

The inner cover is designed to be wiped clean, while the outer cover is removable, machine washable and quick to dry.

Low-Maintenance Construction

The outer cover, inner cover and dual-layer foam base can be separated for inspection and cleaning. Orientation labels and rear-positioned zips help identify the correct direction when reassembling the cushion.

Original JAY ZIP Cushion Specifications

These specifications apply to the original JAY ZIP paediatric wheelchair cushion with a 75kg maximum user weight. They must not be replaced with specifications from the newer JAY Zip+.

ProductOriginal JAY ZIP Wheelchair Cushion
Product TypePaediatric skin protection and positioning cushion
Available Widths200–400mm in 20mm increments
Available Depths200–460mm in 20mm increments
Front Height50mm
Rear Height45mm
Maximum Cushion Height60mm
Maximum User Weight75kg (11.8 stone)
Reference Cushion Weight0.9kg for the 300 × 300mm size
BaseDual-layer contoured foam
Outer CoverSoft, stretchable Ionic+™ microclimatic cover with 3DX™ spacer fabric
Standard Cover ColourBlack
Additional Spare-Cover ColoursPink and blue, subject to availability
Inner CoverMoisture-resistant cover with Aquaguard™ zip and anti-wicking seam thread
Outer-Cover Washing Temperature60°C
Size combinations

The ranges above do not mean that every possible width and depth combination is available. Final sizing and configuration should be based on the current order form and clinical assessment.

Model identification: The original JAY ZIP Cushion has a 75kg capacity and widths extending to 400mm. Do not substitute specifications from the JAY ZIP Back or the newer JAY Zip+ Cushion.

Using and Caring for the JAY ZIP Cushion

Correct clinical assessment, fitting and regular inspection are essential to the performance of the original JAY ZIP Cushion. The following guidance is based on the manufacturer’s owner’s manual.

Professional assessment: Sunrise Medical recommends consulting a clinician experienced in seating and positioning to determine whether the JAY ZIP is appropriate. The cushion should be installed by an authorised Sunrise Medical supplier.

Before First Use

• Inspect all components for shipping damage and do not use the cushion if damage is found.

• Confirm that the selected width and depth have been clinically assessed for the user.

• Check the wheelchair’s stability after fitting, as adding a cushion can alter its centre of gravity.

• Make sure the seat upholstery is not excessively stretched, as this may reduce support and affect positioning.

• Always use the cushion with its cover correctly fitted and facing upwards.

Positioning the Cushion

1. Select a cushion width that matches the user’s hip width when seated.

2. Select a cushion depth that finishes approximately 25–50mm from the back of the knees.

3. Place the cushion against the back of the wheelchair seat with the identification labels and pelvic loading area towards the rear.

4. The user’s hips should sit towards the back of the wheelchair, with the sitting bones centred over the rear area of the cushion.

5. Have the footrests professionally adjusted so that the legs rest firmly but comfortably on the cushion.

Skin Monitoring

Before prolonged sitting, Sunrise Medical recommends trying the cushion for a few hours at a time while a clinician checks the skin for areas of redness.

Continue to check the skin regularly. If redness develops, stop using the cushion and seek advice from the appropriate doctor or therapist.

Pressure management: The JAY ZIP is designed to help reduce pressure and shear, but no wheelchair cushion can completely eliminate sitting pressure or prevent pressure injuries. Follow the complete skin-care and pressure-relief programme recommended by the user’s clinician.

Monthly Inspection

• Check the outer and inner covers for tears, excessive wear or other abnormalities.

• Inspect the foam base for damage or changes in consistency.

• Keep hook-and-loop fastenings away from prolonged moisture, which may weaken the adhesive.

• Do not place additional objects or materials between the user and cushion.

• Keep the cushion away from sharp objects, excessive heat and open flames.

Washing the Outer Cover

1. Remove the outer cover from the cushion and close its zip.

2. Machine wash in warm water at 60°C.

3. Drip dry or tumble dry using a low-temperature setting.

4. Do not iron, dry clean, bleach, steam-autoclave or use industrial washers and dryers.

Cleaning the Foam Base

1. Remove the covers from the foam base.

2. Wipe the foam lightly with a damp cloth.

3. Do not use soap and do not submerge the foam in water.

4. Wipe it with a clean cloth and allow it to air dry completely before reassembly.

Reassembling the Cushion

1. Make sure the foam base and covers are completely dry.

2. Insert the foam base into the moisture-resistant inner cover.

3. Insert the covered foam base into the outer cover.

4. Position both zips and the product-identification label towards the rear of the cushion.

Original JAY ZIP Cushion FAQs

Answers to common questions about the original JAY ZIP paediatric wheelchair cushion.

Is this a wheelchair cushion or wheelchair back?

This product is the original JAY ZIP seat cushion. The JAY ZIP Wheelchair Back is a separate product with different components, measurements and positioning functions.

Is this the newer JAY Zip+ Cushion?

No. This page represents the original JAY ZIP Cushion with a 75kg maximum user weight and widths extending to 400mm. The newer Zip+ is a different product and its specifications do not apply here.

Is the JAY ZIP designed for children?

Yes. The original JAY ZIP is a paediatric wheelchair cushion developed using anthropometric data to provide child-specific sizes and width-dependent foam firmness.

Which JAY ZIP cushion sizes are available?

Widths range from 200–400mm and depths from 200–460mm, generally in 20mm increments. Not every width and depth combination is available, so the required size should be confirmed during assessment.

How is the correct cushion size selected?

Sunrise Medical recommends matching the cushion to the user’s seated hip width. Its front edge should finish approximately 25–50mm from the back of the knees. Final sizing should be determined through clinical assessment.

What is the maximum user weight?

The original JAY ZIP Cushion has a maximum user weight of 75kg, or approximately 11.8 stone.

How high is the JAY ZIP Cushion?

The original cushion measures approximately 50mm at the front and 45mm at the rear, with a maximum contoured height of 60mm.

How much does the JAY ZIP Cushion weigh?

Weight varies with the selected size. Sunrise Medical gives 0.9kg as the reference weight for a 300 × 300mm cushion.

Which cover colours are available?

Black is the standard outer-cover colour. Additional spare covers may be available in pink or blue, subject to the selected configuration and current availability.

Is the JAY ZIP cover antimicrobial?

The outer cover uses silver-containing Ionic+™ stretch fabric, which Sunrise Medical states naturally inhibits bacterial growth.

Does the cushion prevent pressure sores?

No cushion can completely eliminate sitting pressure or guarantee that pressure injuries will not occur. The JAY ZIP is designed to help reduce pressure and shear and should form part of the complete skin-care and pressure-relief programme recommended by the user’s clinician.

Can the outer cover be machine washed?

Yes. Remove the outer cover, close its zip and machine wash it at 60°C. It can be drip dried or tumble dried on low heat. Do not iron, dry clean or bleach it.

How should the foam base be cleaned?

Wipe the foam lightly with a damp cloth without soap. Do not submerge it in water, and allow it to air dry completely before replacing the inner and outer covers.

Does the cushion require professional assessment?

Yes. Sunrise Medical recommends assessment by a clinician experienced in wheelchair seating and positioning. The cushion should also be installed by an authorised supplier.

Enquire NowPlease fill in the form to the best of your knowledge so that our experts can assist you in finding the perfect solution for your needs and requirements.

Reviews

There are no reviews yet.

Be the first to review “JAY Zip Cushion”

Copyright © 2026 Modern Mobility | All Rights Reserved. VAT Relief | Cancellations Return Policy | Privacy Policy | Terms and Conditions