Splash Scooter Cape

£79.69 With Vat Relief
£95.63 inc. VAT

The Splash Scooter Cape is a practical mobility scooter rain cape designed to cover both the seated rider and scooter in wet and windy weather. A clear front panel helps keep the controls and scooter lights visible, while side mirror slots and reflective strips provide useful visibility features.

Available in Medium (125 × 65cm) and Large (135 × 65cm), with a full-length side zip that opens to the bottom to assist fitting and access.

If you’re disabled or have a long-term illness, you will not be charged VAT on products designed or adapted for your own personal or domestic use.

To find out more information contact one of our mobility experts or visit the government website for further advice.

All you need to do is add everything to your basket and when you are ready to checkout just simply click the shopping cart icon in the top right of the screen. Once you have entered your details you will be asked ‘Are you eligible for VAT Exemption?’ and if you qualify click the ‘Disability VAT Exemption’ option and continue to fill in the form once you have completed the form your cart will change to show VAT at £0.

The Splash Scooter Cape provides practical wind and rain protection for both the seated rider and mobility scooter. Its full-cover design includes a transparent front panel, mirror openings, reflective detailing and an accessible full-length side zip.

Full Mobility Scooter Rain Cape

Unlike a lower-body leg cape, the Splash Scooter Cape extends over the rider and around the mobility scooter. This provides broader protection when travelling in wet and windy weather while allowing access to the scooter’s controls.

The cape is available in two sizes and is designed to fit over many different mobility scooter configurations. The rider should still confirm that the selected size provides sufficient coverage without interfering with the controls, wheels or other moving components.

Full coverage
Covers the rider and scooter
Clear front panel
Keeps controls and lights visible
Side access zip
Opens fully to the bottom
Two sizes
Medium and Large

Transparent Control Panel

A soft transparent panel sits over the front control area. This allows the rider to see the scooter’s instruments while helping to keep its front lights visible to pedestrians and other road users.

Suitable for Scooters with Mirrors

Hook-and-loop openings are positioned on either side of the control-panel section so compatible wing mirrors can sit outside the cape. The openings should be aligned carefully so that the rider retains an unobstructed view through both mirrors.

Accessible Side Opening

The heavy-duty side zip extends to the bottom of the cape. This allows the cape to be positioned over the scooter before the user steps or transfers into place, helping to make fitting more manageable.

Reflective Detailing

Reflective strips are incorporated along the sides and rear to help improve the rider’s visibility in darker conditions. They supplement rather than replace working scooter lights, reflectors and appropriate precautions in poor visibility.

Check the fit before travelling: Make sure the cape does not obstruct the controls, lights, mirrors, steering, wheels or brakes. The rider must be able to operate the scooter safely while wearing it.

Browse more mobility scooter capes available from Modern Mobility.

Splash Scooter Cape Sizes and Features

The Splash Scooter Cape is available in Medium and Large. Consider the dimensions of both the seated rider and the mobility scooter when selecting a size.

Product Splash Scooter Cape
Product Type Full mobility scooter rain cape
Medium Dimensions 125 × 65cm
Large Dimensions 135 × 65cm
Large Product Reference PR34003/L
Front Panel Soft transparent panel over the controls
Mirror Access Hook-and-loop side openings
Opening Full-length heavy-duty side zip
Visibility Features Reflective strips on the sides and rear
Intended Use Wind and rain protection while using a mobility scooter

Choosing a Size

• Consider the height and build of the seated rider.

• Check the size and position of the scooter’s tiller and control panel.

• Allow sufficient coverage without leaving excessive loose material close to the wheels.

• Check whether the scooter has wing mirrors and whether they align with the cape’s openings.

• Make sure the rider can reach and operate every control while the cape is fitted.

Medium or Large?

The Large cape is 10cm longer than the Medium but both are listed as 65cm wide. Choosing the larger option does not remove the need to check compatibility with the individual scooter and rider.

Which Splash Cover Do I Need?

Splash Scooter Cape

The full cape on this page covers the seated rider and mobility scooter while travelling in wind and rain.

Splash Scooter Leg Cape

The Splash Scooter Leg Cape is a lined cover that drapes over the rider’s lap and legs rather than enclosing the complete scooter.

Splash Scooter Storage Cover

The Splash Scooter Storage Cover is designed to cover an unoccupied scooter during temporary storage. It must not be used while riding.

Fitting the Splash Scooter Cape

Become familiar with fitting and removing the cape before using it outdoors. Complete the initial fit while the scooter is switched off and positioned on a firm, level surface.

1. Switch the mobility scooter off and apply its brake where applicable.

2. Open the full-length side zip to the bottom of the cape.

3. Position the cape over the scooter, aligning the transparent panel with the tiller and controls.

4. If the scooter has mirrors, open the side slots and carefully pass the mirrors through them.

5. Step or transfer into the scooter using the open side of the cape.

6. Close the zip without trapping clothing, cables or cape material.

7. Check the controls, steering, mirrors, lights and brakes before moving.

Before Every Journey

• Make sure the transparent panel is clean and correctly aligned with the controls.

• Confirm that the scooter’s lights and reflectors remain visible.

• Check that both mirrors remain secure and provide an unobstructed view.

• Keep all loose material away from the wheels, steering and brake controls.

• Check that the rider can reach and operate every control without restriction.

• Consider the weather and avoid travelling where wind, rain or visibility conditions make scooter use unsafe.

Do not travel with an obstructed view: Stop safely if the transparent panel becomes misted, heavily covered by rain or otherwise prevents the controls or surrounding route from being seen clearly.

Cleaning and Storage

Follow any care instructions supplied with the cape. Clean the transparent panel carefully using a soft damp cloth so it does not become scratched or cloudy. Avoid abrasive cleaners that could damage the clear surface.

Allow the cape to dry thoroughly before folding and storing it. Keeping it folded while wet may encourage unpleasant odours or deterioration. Store it in a clean, dry location away from sharp objects and direct heat.

Regular Checks

Periodically inspect the zip, mirror openings, seams, transparent panel and reflective strips. Stop using the cape if it is torn, no longer fits securely or could interfere with safe operation of the scooter.

Splash Scooter Cape FAQs

Answers to common questions about sizing, fitting and using the Splash mobility scooter cape.

What does the Splash Scooter Cape cover?

It is designed to cover both the seated rider and the mobility scooter, providing broader wind and rain protection than a lap or leg cape.

What sizes are available?

The cape is available in Medium, measuring 125 × 65cm, and Large, measuring 135 × 65cm.

How do I choose between Medium and Large?

Consider the seated rider’s height and build together with the scooter’s dimensions and control-panel position. The cape must provide coverage without leaving loose material close to the wheels or restricting the controls.

Will it fit every mobility scooter?

The cape is designed for use with many mobility scooters, but compatibility is not universal. Scooter size, tiller shape, controls, mirrors and the rider’s measurements should all be considered.

Can I see the scooter controls through the cape?

Yes. A soft transparent front panel is positioned over the control area so the rider can see the scooter’s instruments. It must be kept clean and correctly aligned.

Can it be used with scooter mirrors?

The cape has hook-and-loop openings on either side through which compatible wing mirrors can be positioned. Check that the mirrors align properly and still provide a clear view.

How do I get into the scooter while using the cape?

A full-length side zip opens to the bottom. This allows the cape to be placed over the scooter before the rider steps or transfers into position.

Does the cape have reflective strips?

Yes. Reflective strips are positioned on the sides and rear to help improve visibility in darker conditions. They do not replace working scooter lights, reflectors or other safety precautions.

Is this the same as the Splash Scooter Leg Cape?

No. This full cape covers the rider and scooter. The Splash Scooter Leg Cape is a lined cover intended primarily for the rider’s lap and legs.

Can it be used as a scooter storage cover?

It is designed to protect the rider and scooter while travelling. For an unoccupied parked scooter, use a purpose-made product such as the Splash Scooter Storage Cover.

Can I use the cape in strong winds?

Weather conditions should always be assessed before travelling. Do not use the cape where strong winds could affect control of the scooter, displace the material or make the planned journey unsafe.

How should the transparent panel be cleaned?

Follow the supplied care instructions and clean it gently with a soft damp cloth. Avoid abrasive cleaners or rough materials that could scratch the panel and reduce visibility.

Reviews

There are no reviews yet.

Be the first to review “Splash Scooter Cape”

Copyright © 2026 Modern Mobility | All Rights Reserved. VAT Relief | Cancellations Return Policy | Privacy Policy | Terms and Conditions