Autochair Smart Lifter LP Car Boot Hoist

125kg, 150kg and 200kg car boot hoist options.

The Autochair Smart Lifter LP is designed for lifting heavier compatible mobility scooters and powerchairs into a vehicle boot. Its powered four-way operation controls lifting, lowering and movement into or out of the vehicle.

Vehicle and mobility-device compatibility must be confirmed before installation.

Enquire Now

If you’re disabled or have a long-term illness, you will not be charged VAT on products designed or adapted for your own personal or domestic use.

To find out more information contact one of our mobility experts or visit the government website for further advice.

All you need to do is add everything to your basket and when you are ready to checkout just simply click the shopping cart icon in the top right of the screen. Once you have entered your details you will be asked ‘Are you eligible for VAT Exemption?’ and if you qualify click the ‘Disability VAT Exemption’ option and continue to fill in the form once you have completed the form your cart will change to show VAT at £0.

The Autochair Smart Lifter LP is a high-capacity car boot hoist designed to lift compatible mobility scooters and powerchairs into a vehicle. Available in 125kg, 150kg and 200kg versions, it provides powered lifting, lowering and movement into and out of the boot using a simple handheld control.

Car Boot Hoist for Heavier Mobility Equipment

The Smart Lifter LP sits at the higher-capacity end of Autochair’s car boot hoist range. It is designed for larger or heavier mobility equipment, including compatible mobility scooters and powerchairs that may be difficult or impractical to lift into a vehicle manually.

Once professionally installed, the powered hoist lifts the mobility device from outside the vehicle and moves it into the boot using the handheld controller.

125kg / 150kg / 200kg
Three lifting capacities
Approx. 60 seconds
Manufacturer-stated loading time
4-way control
Up, down, in and out

Powered Loading at the Touch of a Button

The Smart Lifter LP uses powered lifting and movement to help reduce the physical effort involved in loading a mobility device into the boot. The handset provides separate controls to raise, lower, move out and move the hoist back into the vehicle.

Autochair states that the complete lift-and-load process can take around 60 seconds once the hoist has been correctly installed and set up for the mobility device.

Designed Around Your Vehicle & Mobility Device

A Smart Lifter is not a universal fit-and-use accessory. The correct hoist, vehicle fitting kit and lifting bracket must be selected for the specific combination of vehicle and mobility device.

The weight of the complete scooter or powerchair should be considered, including fitted batteries, seating and accessories. The vehicle-specific fitting kit may also have its own safe working load that needs to be taken into account.

Compatibility matters: The Smart Lifter LP must be professionally installed and configured for the vehicle and mobility device it will lift. Please enquire with Modern Mobility so compatibility can be checked before installation.

Space-Saving Vehicle Installation

The Smart Lifter is designed to stow within the vehicle boot when not in use. Autochair also designed the hoist section so it can be detached when required, helping preserve useful boot space.

The system can also potentially be transferred if you change vehicle, although a new compatibility assessment and the appropriate fitting kit may be required.

Explore Car Boot Hoists

Browse our wider range of car boot hoists or explore more vehicle adaptations from Autochair.

Smart Lifter LP Features

The Smart Lifter LP combines high lifting capacity with powered four-way operation and a vehicle-specific installation system designed for compatible heavier mobility scooters and powerchairs.

Up to 200kg Lifting Capacity Choose from 125kg, 150kg and 200kg versions according to the mobility device and approved installation.
Four-Way Handset Dedicated controls move the hoist up, down, into the vehicle and out of the vehicle.
Powered Operation The hoist uses electrical power from the vehicle to perform the lifting and loading movements.
Service Indicator The handset includes a service-warning light to indicate when the hoist should be checked by the installer.
Overcurrent Protection Built-in protection temporarily cuts power if the system detects excessive current, such as when an obstruction is encountered or the load is too high.
Automatic Shut-Down The control system switches itself off after approximately five minutes without handset operation.

Smart Lifter LP in Detail

A closer look at some of the key practical features of the Autochair Smart Lifter range.

Autochair Smart Lifter LP four-button car boot hoist control Simple Four-Button Control

Dedicated controls allow the hoist to move up, down, into the vehicle and out of the vehicle.

Autochair Smart Lifter LP car boot hoist lifting up to 200kg High-Capacity Lifting

The LP range includes 125kg, 150kg and 200kg versions for compatible heavier mobility equipment.

Autochair Smart Lifter stowed in a vehicle boot Designed to Preserve Boot Space

The Smart Lifter stows inside the vehicle when not in use and the hoist section can be detached when required.

Choose Your Smart Lifter LP

The Smart Lifter LP is offered in three main lifting capacities for heavier mobility scooters and powerchairs. The correct version depends on the complete weight of the mobility device and the approved vehicle installation.

Smart Lifter LP125 Up to 125kg

High-capacity option for compatible mobility devices with a complete lifting weight within the approved 125kg installation limit.

Smart Lifter LP150 Up to 150kg

Provides additional capacity for heavier compatible scooters and powerchairs where the approved installation supports up to 150kg.

Smart Lifter LP200 Up to 200kg

The highest-capacity LP option, designed for particularly heavy compatible mobility equipment where a 200kg installation is approved.

Do not select a hoist from weight alone: The mobility device, lifting bracket, vehicle and vehicle-specific fitting kit must all be suitable for the required safe working load.

Need a Lower-Capacity Hoist?

For lighter mobility equipment, the Autochair Smart Lifter LC offers 80kg and 100kg lifting options.

Using and Caring for the Smart Lifter LP

The Smart Lifter LP should be installed and initially demonstrated by an accredited installer. Familiarise yourself with the controls and the lifting process before loading your mobility device.

Before Each Use

1. Park the vehicle on flat, level ground and apply the handbrake.

2. Inspect the lifting straps, buckles and fasteners for twisting, fraying, damage or excessive wear.

3. Check the Smart Lifter and electrical connections for visible damage or excessive wear.

4. Confirm that the mobility device is the one the Smart Lifter has been installed and configured to lift.

5. Make sure the mobility device does not exceed the approved lifting capacity of the hoist and installation.

Important: Never use worn or damaged lifting straps and never exceed the approved lifting capacity. If your scooter or powerchair is changed or modified, compatibility should be checked again before using the hoist.

Loading a Mobility Device

1. Switch the Smart Lifter on and use the OUT control to move the hoist fully out of the vehicle.

2. Use the DOWN control to lower the spreader bar towards the mobility device.

3. Connect the spreader bar securely to all of the approved lifting points on the mobility device.

4. Use the UP control to raise the mobility device and check that it is level.

5. Carefully guide the mobility device while using the IN control to move it into the boot.

6. Use the DOWN control to lower the mobility device until it is securely positioned on the boot floor.

7. Switch the Smart Lifter off once loading is complete.

During lifting: Keep hands and fingers away from moving components and pinch points. Never position any part of your body underneath a raised mobility device.

Unloading

The unloading process reverses the loading sequence. Raise the mobility device clear of the boot floor, move it carefully out of the vehicle, rotate and position it as required, then lower it fully to the ground before disconnecting the lifting points.

Make sure there is slack in the lifting system before detaching the spreader bar from the mobility device.

Using the Handset

UP raises the Smart Lifter arm, while DOWN lowers it.

OUT moves the hoist towards the outside of the vehicle, while IN returns it towards the boot.

Release a control button when the required position has been reached. Do not continue operating the lowering control once the spreader bar or mobility device has reached its intended position.

Daily Checks

• Inspect straps, buckles and fasteners for wear or damage.

• Inspect the Smart Lifter itself for damage or excessive wear.

• Check electrical cables and connections for damage or wear.

Periodic Maintenance

Autochair recommends that mounting hardware and lifting pivots are inspected at least every six months for damage, defects and secure fitting.

The manufacturer also recommends an annual service by Autochair or an accredited dealer.

Cleaning

Disconnect the Smart Lifter from power before cleaning. Use a damp cloth and detergent when required.

Do not immerse the hoist in water or allow water to enter the electrical connectors or control box. Allow the unit to dry fully before using it again.

Never lift someone while they are sitting on the scooter, wheelchair or powerchair. The Smart Lifter is designed to lift the mobility device only.

Smart Lifter LP FAQs

Answers to common questions about the Autochair Smart Lifter LP car boot hoist.

What is the Autochair Smart Lifter LP?

The Smart Lifter LP is a powered car boot hoist designed to lift compatible mobility scooters and powerchairs into and out of a vehicle. It is the higher-capacity range within the Autochair Smart Lifter family.

What lifting capacities are available?

The commercially available LP range includes 125kg, 150kg and 200kg lifting capacities. The correct version depends on the mobility device and approved vehicle installation.

Can the Smart Lifter LP lift a mobility scooter?

Yes. The LP range is designed to lift compatible mobility scooters, including heavier models, provided the complete device weight and vehicle installation are within the approved lifting capacity.

Can the Smart Lifter LP lift a powerchair?

Yes. Autochair specifically designed the LP range for compatible heavier mobility devices including powerchairs. Compatibility must still be confirmed for the particular powerchair and vehicle.

How do I know which Smart Lifter LP capacity I need?

The complete weight of the mobility device must be considered, including batteries, seating and fitted accessories. The vehicle, lifting bracket and fitting kit must also support the required safe working load, so the correct model should be confirmed as part of the compatibility assessment.

Will the Smart Lifter LP fit my car?

Compatibility depends on the vehicle, boot dimensions, vehicle-specific fitting kit and the mobility device being lifted. Please enquire with Modern Mobility so the combination can be checked before installation.

Does the Smart Lifter fit every vehicle?

No. Autochair offers a wide range of vehicle-specific installation kits, but the hoist cannot be assumed to fit every vehicle. The available boot space and mobility device also need to be considered.

How long does the Smart Lifter take to load a mobility device?

Autochair states that the Smart Lifter can lift and load a mobility device in around 60 seconds once it has been correctly installed and configured.

How does the Smart Lifter handset work?

The four-way handset provides controls for moving the hoist up, down, into the vehicle and out of the vehicle. It also includes on/off control and a service-warning indicator.

Does the Smart Lifter need professional installation?

Yes. Autochair states that the Smart Lifter should only be installed by an accredited dealer or installer. The installer also configures the system and lifting bracket for the vehicle and mobility device.

Can the Smart Lifter be transferred to another car?

The Smart Lifter can potentially be transferred when changing vehicle, but the new vehicle must be assessed for compatibility and may require a different vehicle-specific installation kit.

Can I use the hoist with a different scooter or powerchair later?

Do not assume a different mobility device will be compatible. Autochair advises contacting the installer if the mobility device changes so the existing Smart Lifter, lifting bracket and capacity can be checked before use.

Does the Smart Lifter take up the whole boot?

The installation does occupy some boot space, but Autochair designed the Smart Lifter to stow compactly and the hoist section can be detached when required. The amount of remaining boot space depends on the vehicle, installation and mobility device.

What should I check before using the Smart Lifter?

Check the lifting straps, buckles and fasteners for wear, inspect the hoist and electrical connections for damage, park on level ground with the handbrake applied and make sure the mobility device remains within the approved lifting capacity.

Can someone stay seated on the scooter or powerchair while it is lifted?

No. Autochair specifically states that nobody should ride on the mobility device while the Smart Lifter is being operated. The hoist is designed to lift the mobility device only.

Enquire Now Please fill in the form to the best of your knowledge so that our experts can assist you in finding the perfect solution for your needs and requirements.
  • [email protected]
  • Blackburn: 01254 680203
  • Clitheroe: 01200 760006
  • Leicester: 0116 263 0600

Reviews

There are no reviews yet.

Be the first to review “Autochair Smart Lifter LP Car Boot Hoist”

Copyright © 2026 Modern Mobility | All Rights Reserved. VAT Relief | Cancellations Return Policy | Privacy Policy | Terms and Conditions