Harley 2-Way Sculptured Support Cushion
The Harley 2-Way Sculptured Support Cushion provides cushioned support across both the seat and back. It can be used on a suitably sized armchair, wheelchair or mobility scooter seat.
Its reversible construction gives the user a choice between a nodular foam surface and a flat foam surface. The seat section also incorporates a shaped coccyx cut-out, helping to reduce direct contact beneath the tailbone while sitting.
Two Foam Surfaces
Choose between the textured nodular foam surface and the smoother flat reverse by turning the support over.
Seat and Back Support
The design supports both the seating area and the back, with each section measuring 40 × 36 × 5cm.
Coccyx Cut-Out
A shaped opening in the seat section reduces direct contact beneath the coccyx or tailbone.
Tartan Cover
Product code SP44175 is supplied with a distinctive Royal Stewart red-check tartan cover.
Key Features
• Harley seat-and-back support cushion.
• Nodular foam surface on one side.
• Flat foam surface on the reverse.
• Shaped coccyx cut-out in the seat section.
• Seat section measures 40 × 36 × 5cm.
• Back section measures 40 × 36 × 5cm.
• Royal Stewart tartan cover supplied as standard.
• Maximum user weight of 13 stone.
Please check the fit: The cushion adds approximately 5cm to the seating surface and introduces a back section behind the user. Check the resulting seat height, usable seat depth and overall support before prolonged use.
This product is designed to improve seated comfort. It is not described by the manufacturer as a clinically graded pressure-relief cushion, so anyone with an existing pressure injury or specialist postural needs should seek advice from an appropriate healthcare professional.
Using the Harley 2-Way Support Cushion
The “2-Way” name refers to the two available foam surfaces. One side has a nodular texture, while the reverse presents a flat surface.
Nodular Surface
The sculptured nodular surface provides a textured point of contact across the seat and back.
Flat Surface
Turn the support over when a smoother, flat foam surface is preferred.
What “2-Way” means: It describes the choice between the nodular and flat surfaces. It does not refer to two different sitting directions.
Positioning the Coccyx Cut-Out
Position the seat section so the shaped cut-out sits at the rear, beneath the coccyx or tailbone area. The user should sit centrally, with the back section resting evenly against the chair’s backrest.
• Place the support on a stable, suitably sized seat.
• Keep the coccyx cut-out at the rear of the seating surface.
• Make sure the seat and back sections lie evenly without bunching or folding.
• Check that the support remains stable when the user sits, moves or transfers.
• Stop using it if the cushion moves significantly or causes uncomfortable positioning.
Using It on a Wheelchair or Mobility Scooter
The support may be suitable for some wheelchair and mobility scooter seats, provided its dimensions and shape are compatible. Adding cushioning can change the user’s seated height and reduce the usable depth between the backrest and the front of the seat.
• Confirm that the 40cm-wide sections fit within the available seating area.
• Check that armrests, side guards and controls remain easy to use.
• Reassess footrest or footplate positioning after raising the user by approximately 5cm.
• Make sure the back section does not push the user too far forwards.
• Do not allow the support to interfere with a vehicle seat belt, wheelchair restraint or postural harness.
Checking Seated Comfort
The user’s feet should remain appropriately supported and the front of the cushion should not press into the backs of the knees. If the user has specialist seating, postural or pressure-care requirements, consult their occupational therapist, physiotherapist or other appropriate professional before changing the seating setup.
Harley 2-Way Cushion Specifications
Check the dimensions against the intended seat and keep the user within the stated maximum weight limit.
| Brand | Harley |
| Supplier | Able2 |
| Product name | Harley 2-Way Sculptured Support Cushion |
| Product code | SP44175 |
| Product type | Reversible sculptured seat-and-back support cushion |
| First surface | Nodular foam |
| Reverse surface | Flat foam |
| Seat-section dimensions | 40 × 36 × 5cm (approximately 16 × 14 × 2") |
| Back-section dimensions | 40 × 36 × 5cm (approximately 16 × 14 × 2") |
| Coccyx cut-out | Yes, positioned within the seat section |
| Standard cover | Royal Stewart red-check tartan |
| Maximum user weight | 13 stone (approximately 82.5kg) |
Before First Use
• Check that both sections fit fully within the intended seat and backrest.
• Inspect the foam and cover for damage or excessive compression.
• Position the coccyx cut-out at the rear of the seat.
• Confirm that the selected surface remains comfortable and stable.
• Check that the user does not exceed the 13-stone maximum weight.
Care and Inspection
Follow the care label supplied with the cushion when cleaning it. The published product information does not confirm a specific washing temperature or whether the cover is suitable for machine washing.
• Deal with spillages promptly and avoid saturating the foam.
• Allow the support to dry completely before using or storing it.
• Do not use bleach, strong solvents or direct heat unless expressly permitted by the care label.
• Check regularly for torn fabric, damaged seams or foam that no longer returns to shape.
• Replace the support if deterioration prevents it from remaining level and supportive.
Need confirmation before washing? Check the sewn-in care label or contact Modern Mobility before placing the cover in a washing machine or tumble dryer.
Reviews
There are no reviews yet.